589 lines
23 KiB
Plaintext
589 lines
23 KiB
Plaintext
# Documents/brltty.conf. Generated from brltty.conf.in by configure.
|
|
###############################################################################
|
|
# BRLTTY - A background process providing access to the console screen (when in
|
|
# text mode) for a blind person using a refreshable braille display.
|
|
#
|
|
# Copyright (C) 1995-2015 by The BRLTTY Developers.
|
|
#
|
|
# BRLTTY comes with ABSOLUTELY NO WARRANTY.
|
|
#
|
|
# This is free software, placed under the terms of the
|
|
# GNU General Public License, as published by the Free Software
|
|
# Foundation; either version 2 of the License, or (at your option) any
|
|
# later version. Please see the file LICENSE-GPL for details.
|
|
#
|
|
# Web Page: http://brltty.com/
|
|
#
|
|
# This software is maintained by Dave Mielke <dave@mielke.cc>.
|
|
###############################################################################
|
|
|
|
# This is a configuration file template for the BRLTTY application.
|
|
# Uncomment those entries which apply to your personal needs and system
|
|
# requirements.
|
|
|
|
# BRLTTY expects to find its configuration file in "/etc/brltty.conf"
|
|
# (can be overridden with the -f [--configuration-file=] option).
|
|
# If it doesn't exist, then BRLTTY silently continues but may require
|
|
# that certain command line options be explicitly supplied.
|
|
|
|
# Blank lines are ignored. The character '#', anywhere on a line,
|
|
# initiates a comment; all characters from it to the end of that line
|
|
# are ignored.
|
|
|
|
# Each configuration entry consists of a keyword followed by its operand.
|
|
# An arbitrary amount of white space, (blanks and/or tabs), may occur
|
|
# before the keyword, as well as before and after the operand. Keyword
|
|
# processing is not case sensitive. Examples of valid entries are:
|
|
#
|
|
# Braille-Driver pm # Papenmeier braille displays.
|
|
# braille-device serial:ttyS0 # The first serial device.
|
|
# SPEECH-DRIVER fv # The Festival Text to Speech System.
|
|
|
|
# The default settings given within the following descriptions assume no
|
|
# special build options (see "./configure --help" in the top-level
|
|
# directory of the source tree.
|
|
|
|
|
|
############################
|
|
# Generic Braille Settings #
|
|
############################
|
|
|
|
# The braille-driver directive specifies the two-letter driver
|
|
# identification code of the driver for the braille display.
|
|
# If not specified, autodetection will be performed.
|
|
# If more than one driver, separated by commas, is specified,
|
|
# then autodetection will be performed amongst them.
|
|
# (can be overridden with the -b [--braille-driver=] option)
|
|
#braille-driver auto # autodetect
|
|
#braille-driver al # Alva
|
|
#braille-driver at # Albatross
|
|
#braille-driver ba # BrlAPI
|
|
#braille-driver bc # BrailComm
|
|
#braille-driver bd # Braudi
|
|
#braille-driver bg # B2G
|
|
#braille-driver bl # BrailleLite
|
|
#braille-driver bm # Baum
|
|
#braille-driver bn # BrailleNote
|
|
#braille-driver cb # CombiBraille
|
|
#braille-driver ce # Cebra
|
|
#braille-driver ec # EcoBraille
|
|
#braille-driver eu # EuroBraille
|
|
#braille-driver fs # FreedomScientific
|
|
#braille-driver hd # Hedo
|
|
#braille-driver hm # HIMS
|
|
#braille-driver ht # HandyTech
|
|
#braille-driver hw # HumanWare
|
|
#braille-driver ir # Iris
|
|
#braille-driver lb # Libbraille
|
|
#braille-driver lt # LogText
|
|
#braille-driver mb # MultiBraille
|
|
#braille-driver md # MDV
|
|
#braille-driver mm # BrailleMemo
|
|
#braille-driver mn # MiniBraille
|
|
#braille-driver mt # Metec
|
|
#braille-driver np # NinePoint
|
|
#braille-driver pg # Pegasus
|
|
#braille-driver pm # Papenmeier
|
|
#braille-driver sk # Seika
|
|
#braille-driver tn # TechniBraille
|
|
#braille-driver ts # TSI
|
|
#braille-driver tt # TTY
|
|
#braille-driver vd # VideoBraille
|
|
#braille-driver vo # Voyager, BraillePen/EasyLink
|
|
#braille-driver vr # Virtual
|
|
#braille-driver vs # VisioBraille
|
|
#braille-driver xw # XWindow
|
|
|
|
# The braille-device directive specifies the device to which the braille
|
|
# display is connected. The generic syntax is type:device. The device
|
|
# type is optional, and, for backward compatibility, defaults to serial.
|
|
# The following devices are supported (brackets indicate optionality):
|
|
# serial:path (relative paths are anchored at "/dev")
|
|
# usb:[serial-number]
|
|
# bluetooth:address
|
|
# If not specified, "usb:" will be used.
|
|
# If more than one device, separated by commas, is specified,
|
|
# then each of them will be probed in turn.
|
|
# (can be overridden with the -d [--braille-device=] option)
|
|
#braille-device serial:ttyS0 # First serial device.
|
|
#braille-device usb: # First USB device matching braille driver.
|
|
#braille-device usb:nnnnn # Specific USB device by serial number.
|
|
#braille-device bluetooth:xx:xx:xx:xx:xx:xx # Specific bluetooth device by address.
|
|
#
|
|
# NOTE: If the device is connected via a serial-to-USB adapter then setting
|
|
# braille-device to usb: will not work. In this case it needs to identify the
|
|
# virtual serial device which the kernel has created for the adapter, i.e. to
|
|
# something like serial:ttyUSB0 (see the kernel messages on device plug to get
|
|
# the actual device name).
|
|
|
|
# The release-device directive specifies whether or not the device to which the
|
|
# braille display is connected is to be released when the current screen or
|
|
# window can't be read by BRLTTY. If not specified, "on" will be used on Windows
|
|
# platforms and "off" will be used on all other platforms.
|
|
# (can be overridden with the -r [--release-device] option)
|
|
#release-device on # Release the device.
|
|
#release-device off # Don't release the device.
|
|
|
|
# The text-table directive specifies which text table to use. Relative paths
|
|
# are anchored at "/etc/brltty/Text". If not specified, locale-based
|
|
# autoselection with fallback to "en-nabcc" will be performed.
|
|
# (can be overridden with the -t [--text-table=] option)
|
|
#text-table auto # locale-based autoselection
|
|
#text-table ar # Arabic (generic)
|
|
#text-table as # Assamese
|
|
#text-table awa # Awadhi
|
|
#text-table bg # Bulgarian
|
|
#text-table bh # Bihari
|
|
#text-table bn # Bengali
|
|
#text-table bo # Tibetan
|
|
#text-table bra # Braj
|
|
#text-table brf # Braille Ready Format (for viewing .brf files within an editor or pager)
|
|
#text-table cs # Czech
|
|
#text-table cy # Welsh
|
|
#text-table da # Danish
|
|
#text-table da-1252 # Danish (Svend Thougaard, 2002-11-18)
|
|
#text-table da-lt # Danish (LogText)
|
|
#text-table de # German
|
|
#text-table dra # Dravidian
|
|
#text-table el # Greek
|
|
#text-table en # English
|
|
#text-table en_CA # English (Canada)
|
|
#text-table en_GB # English (United Kingdom)
|
|
#text-table en_US # English (United States)
|
|
#text-table en-nabcc # English (North American Braille Computer Code)
|
|
#text-table eo # Esperanto
|
|
#text-table es # Spanish
|
|
#text-table et # Estonian
|
|
#text-table fi # Finnish
|
|
#text-table fr # French
|
|
#text-table fr_CA # French (Canada)
|
|
#text-table fr_FR # French (France)
|
|
#text-table fr-2007 # French (unified 2007)
|
|
#text-table fr-cbifs # French (Code Braille Informatique Français Standard)
|
|
#text-table fr-vs # French (VisioBraille)
|
|
#text-table ga # Irish
|
|
#text-table gd # Gaelic
|
|
#text-table gon # Gondi
|
|
#text-table gu # Gujarati
|
|
#text-table he # Hebrew
|
|
#text-table hi # Hindi
|
|
#text-table hr # Croatian
|
|
#text-table hu # Hungarian
|
|
#text-table hy # Armenian
|
|
#text-table is # Icelandic
|
|
#text-table it # Italian
|
|
#text-table kha # Khasi
|
|
#text-table kn # Kannada
|
|
#text-table kok # Konkani
|
|
#text-table kru # Kurukh
|
|
#text-table lt # Lituanian
|
|
#text-table lv # Latvian
|
|
#text-table mg # Malagasy
|
|
#text-table mi # Maori
|
|
#text-table ml # Malayalam
|
|
#text-table mni # Manipuri
|
|
#text-table mr # Marathi
|
|
#text-table mt # Maltese
|
|
#text-table mun # Munda
|
|
#text-table mwr # Marwari
|
|
#text-table ne # Nepali
|
|
#text-table new # Newari
|
|
#text-table nl # Dutch
|
|
#text-table nl_BE # Dutch (Belgium)
|
|
#text-table nl_NL # Dutch (Netherlands)
|
|
#text-table no # Norwegian
|
|
#text-table no-generic # Norwegian (with support for other languages)
|
|
#text-table no-oup # Norwegian (Offentlig utvalg for punktskrift)
|
|
#text-table nwc # Newari (old)
|
|
#text-table or # Oriya
|
|
#text-table pa # Panjabi
|
|
#text-table pi # Pali
|
|
#text-table pl # Polish
|
|
#text-table pt # Portuguese
|
|
#text-table ro # Romanian
|
|
#text-table ru # Russian
|
|
#text-table sa # Sanskrit
|
|
#text-table sat # Santali
|
|
#text-table sd # Sindhi
|
|
#text-table sk # Slovak
|
|
#text-table sl # Slovenian
|
|
#text-table sv # Swedish
|
|
#text-table sv-1989 # Swedish (1989 standard)
|
|
#text-table sv-1996 # Swedish (1996 standard)
|
|
#text-table sw # Swahili
|
|
#text-table ta # Tamil
|
|
#text-table te # Telugu
|
|
#text-table tr # Turkish
|
|
#text-table vi # Vietnamese
|
|
|
|
# The attributes-table directive specifies which attributes table to use.
|
|
# Relative paths are anchored at "/etc/brltty/Attributes". If not specified,
|
|
# "left_right" will be used.
|
|
# (can be overridden with the -a [--attributes-table=] option)
|
|
#attributes-table left_right # foreground colour in the left column and background colour in the right column
|
|
#attributes-table invleft_right # inverse foreground colour in the left column and background colour in the right column
|
|
#attributes-table upper_lower # foreground colour in the upper square and background colour in the lower square
|
|
|
|
# The contraction-table directive specifies which contraction table to use.
|
|
# Relative paths are anchored at "/etc/brltty/Contraction". If not specified, no
|
|
# contraction table will be available.
|
|
# (can be overridden with the -c [--contraction-table=] option)
|
|
#contraction-table af # Afrikaans (contracted)
|
|
#contraction-table am # Amharic (uncontracted)
|
|
#contraction-table de-basis # German (uncontracted)
|
|
#contraction-table de-kurzschrift # German (contracted - 1998 standard)
|
|
#contraction-table de-vollschrift # German (basic contractions)
|
|
#contraction-table en-ueb-g2 # English (Unified English Braille, grade 2)
|
|
#contraction-table en-us-g2 # English (US, grade 2)
|
|
#contraction-table es # Spanish (grade 2)
|
|
#contraction-table fr-abrege # French (contracted)
|
|
#contraction-table fr-integral # French (uncontracted)
|
|
#contraction-table ha # Hausa (contracted)
|
|
#contraction-table id # Indonesian (contracted)
|
|
#contraction-table ja # Japanese (uncontracted)
|
|
#contraction-table ko-g1 # Korean (grade 1)
|
|
#contraction-table ko-g2 # Korean (grade 2)
|
|
#contraction-table ko # Korean (uncontracted)
|
|
#contraction-table mg # Malagasy (contracted)
|
|
#contraction-table mun # Munda (contracted)
|
|
#contraction-table nl # Dutch (contracted)
|
|
#contraction-table ny # Chichewa (contracted)
|
|
#contraction-table ipa # International Phonetic Alphabet
|
|
#contraction-table pt # Portuguese (grade 2)
|
|
#contraction-table si # Sinhalese (uncontracted)
|
|
#contraction-table sw # Swahili (contracted)
|
|
#contraction-table th # Thai (contracted)
|
|
#contraction-table zh-tw # Chinese (Taiwan, uncontracted)
|
|
#contraction-table zh-tw-ucb # Chinese (Taiwan, Unique Chinese Braille)
|
|
#contraction-table zu # Zulu (contracted)
|
|
|
|
|
|
#############################
|
|
# Braille Driver Parameters #
|
|
#############################
|
|
|
|
# The braille-parameters directive passes non-generic parameters through
|
|
# to the braille driver.
|
|
# (can be overridden with the -B [--braille-parameters=] option)
|
|
#braille-parameters driver:parameter=setting,...
|
|
|
|
# Alva Braille Driver Parameters
|
|
#braille-parameters al:RotatedCells=no # [no,yes]
|
|
#braille-parameters al:SecondaryRoutingKeyEmulation=no # [no,yes]
|
|
|
|
# BrlAPI Braille Driver Parameters
|
|
#braille-parameters ba:Auth=/etc/brlapi.key
|
|
#braille-parameters ba:Host=:0
|
|
|
|
# BrailleLite Braille Driver Parameters
|
|
#braille-parameters bl:BaudRate=9600 # [300,600,1200,2400,4800,9600,19200,38400]
|
|
#braille-parameters bl:KbEmu=yes # [yes,no]
|
|
|
|
# Baum Braille Driver Parameters
|
|
#braille-parameters bm:Protocol=default # [default,escape,hid1,hid2,ht,pb]
|
|
#braille-parameters bm:VarioKeys=no # [no,yes]
|
|
|
|
# EuroBraille Braille Driver Parameters
|
|
#braille-parameters eu:Protocol= # [auto,azerbraille,clio,eurobraille,notebraille,pupibraille,scriba,esys,esytime,iris,esysiris]
|
|
|
|
# HandyTech Braille Driver Parameters
|
|
#braille-parameters ht:SetTime=no # [no,yes]
|
|
|
|
# Iris Braille Driver Parameters
|
|
#braille-parameters ir:Embedded= # [no,yes]
|
|
#braille-parameters ir:LatchDelay=10 # [0-100] (tenths of a second)
|
|
#braille-parameters ir:Protocol= # [eurobraille,native]
|
|
|
|
# Libbraille Braille Driver Parameters
|
|
#braille-parameters lb:Device=/dev/ttyS0 #
|
|
#braille-parameters lb:Driver=auto #
|
|
#braille-parameters lb:Table=us.tbl #
|
|
|
|
# TSI Braille Driver Parameters
|
|
#braille-parameters ts:HighBaud=yes # [no,yes]
|
|
#braille-parameters ts:SetBaud=9600 # [4800,9600,19200]
|
|
|
|
# TTY Braille Driver Parameters
|
|
#braille-parameters tt:Baud=9600 #
|
|
#braille-parameters tt:CharSet=ISO8859-1 #
|
|
#braille-parameters tt:Columns=40 # [1-80]
|
|
#braille-parameters tt:Lines=1 # [1-3]
|
|
#braille-parameters tt:Locale= #
|
|
#braille-parameters tt:Term=vt100 # [terminfo]
|
|
|
|
# VisioBraille Braille Driver Parameters
|
|
#braille-parameters vs:Baud=57600 #
|
|
#braille-parameters vs:DisplaySize=40 # [20-40]
|
|
#braille-parameters vs:PromVersion=4 # [3-6]
|
|
|
|
# XWindow Braille Driver Parameters
|
|
#braille-parameters xw:Columns=40 # [1-80]
|
|
#braille-parameters xw:Font=name # []
|
|
#braille-parameters xw:Input=off # [off,on]
|
|
#braille-parameters xw:Lines=1 # [1-3]
|
|
#braille-parameters xw:Model=bare # [bare]
|
|
#braille-parameters xw:TkParms= #
|
|
|
|
|
|
###########################
|
|
# Generic Speech Settings #
|
|
###########################
|
|
|
|
# The speech-driver directive specifies the two-letter driver
|
|
# identification code of the driver for the speech synthesizer.
|
|
# If not specified, autodetection will be performed.
|
|
# If more than one driver, separated by commas, is specified,
|
|
# then autodetection will be performed amongst them.
|
|
# (can be overridden with the -s [--speech-driver=] option)
|
|
#speech-driver auto # autodetect
|
|
#speech-driver al # Alva
|
|
#speech-driver an # Android (text to speech engine)
|
|
#speech-driver bl # BrailleLite
|
|
#speech-driver cb # CombiBraille
|
|
#speech-driver es # eSpeak (text to speech engine)
|
|
#speech-driver fl # FestivalLite (text to speech engine)
|
|
#speech-driver fv # Festival (text to speech engine)
|
|
#speech-driver gs # GenericSay (pipes to /usr/local/bin/say)
|
|
#speech-driver mp # Mikropuhe (text to speech engine)
|
|
#speech-driver sd # SpeechDispatcher (text to speech server)
|
|
#speech-driver sw # Swift (text to speech engine)
|
|
#speech-driver th # Theta (text to speech engine)
|
|
#speech-driver vv # ViaVoice (text to speech engine)
|
|
#speech-driver xs # ExternalSpeech (executes /usr/local/bin/externalspeech)
|
|
|
|
# The speech-input directive specifies the name of the file system object
|
|
# (FIFO, named pipe, named socket, etc) which can be used by external
|
|
# applications for text-to-speech conversion via BRLTTY's speech driver.
|
|
# Relative paths are anchored at the current working directory. If not
|
|
# specified, the file system object isn't created.
|
|
# (can be overridden with the -i [--speech-input=] option)
|
|
#speech-input /path/to/file-system-object
|
|
|
|
|
|
############################
|
|
# Speech Driver Parameters #
|
|
############################
|
|
|
|
# The speech-parameters directive passes non-generic parameters through
|
|
# to the speech driver.
|
|
# (can be overridden with the -S [--speech-parameters=] option)
|
|
#speech-parameters driver:parameter=setting,...
|
|
|
|
# eSpeak Speech Driver Parameters
|
|
#speech-parameters es:MaxRate=450 # [80-]
|
|
#speech-parameters es:Path=
|
|
#speech-parameters es:PunctList=
|
|
#speech-parameters es:Voice=default
|
|
|
|
# ExternalSpeech Speech Driver Parameters
|
|
#speech-parameters xs:Program=/usr/local/bin/externalspeech
|
|
#speech-parameters xs:Uid=65534
|
|
#speech-parameters xs:Gid=65534
|
|
|
|
# Festival Speech Driver Parameters
|
|
#speech-parameters fv:Command=festival # [/path/to/command]
|
|
#speech-parameters fv:Name= # [kevin,kal]
|
|
|
|
# FestivalLite Speech Driver Parameters
|
|
#speech-parameters fl:Pitch=100 # [50-200]
|
|
|
|
# GenericSay Speech Driver Parameters
|
|
#speech-parameters gs:Command=/usr/local/bin/say
|
|
|
|
# Mikropuhe Speech Driver Parameters
|
|
#speech-parameters mp:Name= # [/path/to/mikropuhe/name.pu5]
|
|
#speech-parameters mp:Pitch=0 # [-10-10]
|
|
|
|
# SpeechDispatcher Speech Driver Parameters
|
|
#speech-parameters sd:Language= # [two-letter language code]
|
|
#speech-parameters sd:Module= # [flite,festival,epos-generic,dtk-generic,...]
|
|
#speech-parameters sd:Port=6560 # [1-65535] # [1-65535]
|
|
#speech-parameters sd:Voice= # [male1,female1,male2,female2,male3,female3,child_male,child_female]
|
|
|
|
# Swift Speech Driver Parameters
|
|
#speech-parameters sw:Name= # [voice,/path/to/voice]
|
|
|
|
# Theta Speech Driver Parameters
|
|
#speech-parameters th:Age= # [1-99,-1--99]
|
|
#speech-parameters th:Gender= # [male,female,neuter]
|
|
#speech-parameters th:Language= # [two-letter language code]
|
|
#speech-parameters th:Name= # [voice,/path/to/voice]
|
|
#speech-parameters th:Pitch=0.0 # [-2.0-2.0]
|
|
|
|
# ViaVoice Speech Driver Parameters
|
|
#speech-parameters vv:IniFile=/usr/lib/ViaVoiceTTS/eci.ini
|
|
#speech-parameters vv:SampleRate= # [8000,11025,22050]
|
|
#speech-parameters vv:AbbreviationMode= # [on,off]
|
|
#speech-parameters vv:NumberMode= # [word,year]
|
|
#speech-parameters vv:SynthMode= # [sentence,none]
|
|
#speech-parameters vv:TextMode= # [talk,spell,literal,phonetic]
|
|
#speech-parameters vv:Language= # [AmericanEnglish,BritishEnglish,CastilianSpanish,MexicanSpanish,StandardFrench,CanadianFrench,StandardGerman,StandardItalian,SimplifiedChinese,BrazilianPortuguese]
|
|
#speech-parameters vv:Voice= # [AdultMale,AdultFemale,Child,ElderlyFemale,ElderlyMale]
|
|
#speech-parameters vv:VocalTract= # [male,female]
|
|
#speech-parameters vv:Breathiness= # [0-100]
|
|
#speech-parameters vv:HeadSize= # [0-100]
|
|
#speech-parameters vv:PitchBaseline= # [0-100]
|
|
#speech-parameters vv:PitchFluctuation= # [0-100]
|
|
#speech-parameters vv:Roughness= # [0-100]
|
|
|
|
|
|
#####################
|
|
# Keyboard Settings #
|
|
#####################
|
|
|
|
# The keyboard-table directive specifies which keyboard table to use. Relative paths are
|
|
# anchored at "/etc/brltty/Keyboard". If not specified, no keyboard table is used.
|
|
# (can be overridden with the -k [--keyboard-table=] option)
|
|
#keyboard-table braille # bindings for braille keyboards
|
|
#keyboard-table desktop # bindings for full keyboards
|
|
#keyboard-table keypad # bindings for keypad-based navigation
|
|
#keyboard-table laptop # bindings for keyboards without a keypad
|
|
#keyboard-table sun_type6 # bindings for Sun Type 6 keyboards
|
|
|
|
# The keyboard-properties directive specifies which keyboards to monitor.
|
|
# If not specified, all keyboards are monitored.
|
|
# (can be overridden with the -K [--keyboard-properties=] option)
|
|
#keyboard-properties Type=any # [any,ps2,usb,bluetooth]
|
|
#keyboard-properties Vendor=0X0000 # [0X0000-0XFFFF]
|
|
#keyboard-properties Product=0X0000 # [0X0000-0XFFFF]
|
|
|
|
|
|
##################
|
|
# Sound Settings #
|
|
##################
|
|
|
|
# The pcm-device directive specifies the device to use for soundcard
|
|
# digital audio. If not specified, a method- and system-dependent
|
|
# default will be used.
|
|
# (can be overridden with the -p [--pcm-device=] option)
|
|
#pcm-device /path/to/device # most methods
|
|
#pcm-device pcm-handle-id # ALSA (see second parameter of snd_pcm_open)
|
|
|
|
# The midi-device directive specifies the device to use for the Musical
|
|
# Instrument Digital Interface. If not specified, a method- and
|
|
# system-dependent default will be used.
|
|
# (can be overridden with the -m [--midi-device=] option)
|
|
#midi-device /path/to/device # most methods
|
|
#midi-device client:port # ALSA (may use number or case-sensitive substring of name)
|
|
|
|
|
|
##########################
|
|
# Miscellaneous Settings #
|
|
##########################
|
|
|
|
# The preferences-file directive specifies the file in which to save the user's
|
|
# preferences. Relative paths are anchored at "/var/lib/brltty". If not
|
|
# specified, "brltty.prefs" will be used.
|
|
# (can be overridden with the -F [--preferences-file=] option)
|
|
#preferences-file brltty.prefs
|
|
|
|
# The log-level directive specifies the severity threshold for diagnostics
|
|
# written to the system log. Less severe diagnostics will not be logged. If not
|
|
# specified, "notice" will be used.
|
|
# (can be overridden with the -l [--log-level=] option)
|
|
#log-level emergency
|
|
#log-level alert
|
|
#log-level critical
|
|
#log-level error
|
|
#log-level warning
|
|
#log-level notice
|
|
#log-level information
|
|
#log-level debug
|
|
|
|
# The log-file directive specifies the file to which diagnostics are written.
|
|
# Relative paths are anchored at the current working directory. If not
|
|
# specified, diagnostics are written to the system log.
|
|
# (can be overridden with the -L [--log-file=] option)
|
|
#log-file /tmp/brltty.log
|
|
|
|
# The updatable-directory directive specifies the absolute path to a directory
|
|
# which contains files that can be updated (preferences, saved clipboard, etc).
|
|
# If not specified, "/var/lib/brltty" will be used.
|
|
# (can be overridden with the -U [--updatable-directory=] option)
|
|
#updatable-directory /var/lib/brltty
|
|
|
|
# The writable-directory directive specifies the absolute path to a directory
|
|
# which can be written to (creation of missing but needed resources, etc). If
|
|
# not specified, "/var/run/brltty" will be used.
|
|
# (can be overridden with the -W [--writable-directory=] option)
|
|
#writable-directory /var/run/brltty
|
|
|
|
# The drivers-directory directive specifies the absolute path to the
|
|
# directory which contains the dynamically loadable drivers. If not
|
|
# specified, /lib/brltty will be used.
|
|
# (can be overridden with the -D [--drivers-directory=] option)
|
|
#drivers-directory /lib/brltty
|
|
|
|
# The tables-directory directive specifies the absolute path to the directory
|
|
# which contains the text, attributes, contraction, keyboard, and input tables.
|
|
# If not specified, "/etc/brltty" will be used.
|
|
# (can be overridden with the -T [--tables-directory=] option)
|
|
#tables-directory /etc/brltty
|
|
|
|
|
|
################################################
|
|
# Application Programming Interface Parameters #
|
|
################################################
|
|
|
|
# The no-api directive disables the Application Programming Interface (API).
|
|
# (can be overridden with the -N [--no-api=] option)
|
|
#no-api off # [off,on]
|
|
|
|
# The api-parameters directive passes parameters to the Application
|
|
# Programming Interface.
|
|
# (can be overridden with the -A [--api-parameters=] option)
|
|
#api-parameters parameter=setting,...
|
|
|
|
#api-parameters Auth=keyfile:/etc/brlapi.key # Require authentication key
|
|
#api-parameters Auth=user:joe # Allow some local user
|
|
#api-parameters Auth=group:brl # Allow some local group
|
|
#api-parameters Host=:0 # Accept only local Unix connections
|
|
#api-parameters Host=0.0.0.0:0 # Accept any internet connection.
|
|
#api-parameters StackSize=65536
|
|
|
|
|
|
###########################
|
|
# Generic Screen Settings #
|
|
###########################
|
|
|
|
# The screen-driver directive specifies the two-letter driver
|
|
# identification code of the driver for the console screen.
|
|
# (can be overridden with the -x [--screen-driver=] option)
|
|
#screen-driver an # Android
|
|
#screen-driver as # AtSpi
|
|
#screen-driver a2 # AtSpi2
|
|
#screen-driver hd # Hurd
|
|
#screen-driver lx # Linux
|
|
#screen-driver pb # PCBIOS
|
|
#screen-driver sc # Screen
|
|
#screen-driver wn # Windows
|
|
|
|
|
|
############################
|
|
# Screen Driver Parameters #
|
|
############################
|
|
|
|
# The screen-parameters directive passes non-generic parameters through
|
|
# to the screen driver.
|
|
# (can be overridden with the -X [--screen-parameters=] option)
|
|
#screen-parameters driver:parameter=setting,...
|
|
|
|
# AtSpi Screen Driver Parameters
|
|
#screen-parameters as:Type=text+terminal # [text,terminal,all]+...
|
|
|
|
# AtSpi2 Screen Driver Parameters
|
|
#screen-parameters as:Release=yes # [yes,no]
|
|
#screen-parameters as:Type=text+terminal # [text,terminal,all]+...
|
|
|
|
# Linux Screen Driver Parameters
|
|
#screen-parameters lx:Charset=name+... # []
|
|
#screen-parameters lx:DebugSfm=no # [no,yes]
|
|
#screen-parameters lx:HFB=auto # [auto,vga,fb,0-7]
|
|
#screen-parameters lx:VT=0 # [0-63]
|
|
|
|
# Windows Screen Driver Parameters
|
|
#screen-parameters wn:Root=no # [no,yes]
|
|
#screen-parameters wn:FollowFocus=yes # [yes,no]
|
|
|
|
|